So much went on at TCT this year that we don’t think we could remember it all if we tried. Whether you were there with us or had to miss out, we hope you’ll join us on a little trip down memory lane. If you have any particular memories you
A Look Back At TCT Show 2017 Read More »
Here at GoPrint3D we’re really getting into final preparations for TCT 2017! We hope you are as excited about seeing all the printers, as we are at getting to show them off. We’re taking quite a selection of our 3D printer range down to the NEC this year, and we’re
Gearing up for TCT 2017! The Great Printer Reveal Read More »
Markforged recently announced the release of their new Industrial Composite Series, comprising the Markforged X3, X5 and X7 3D printers. These large-format 3D printers offer the strength required to replace costly machining processes, with significant cost savings available as a result. If you missed our launch article, below we have provided
Your Guide to the Markforged X3, X5 and X7 Read More »
A detailed model of the ancient Greek temple, The Parthenon has been created in a collaboration between DL Additive, Arketyp 3D and an amateur enthusiast of ancient architecture. The model, produced in France, used three EnvisionTEC printers to produce the model. The Ultra 3SP is capable of producing high quality
Parthenon Reconstructed with 3D Printing Read More »
Prior to additive manufacturing, Dixon Valve, a US-based manufacturer of fittings for fluid transfer industries, relied on outsourcing and costly in-house machining processes to produce tools. But thanks to the Markforged Mark Two, they are now able to 3D print their own tools and jaws for industrial robotic arms, saving
Case Study: How Dixon Valve US Uses 3D Printing in Robotic Automation Read More »
Please note: We do not currently sell a 3D printer that can print glass. Whilst glass has been available as a material for 3D printing before, the methods used have left the product opaque. Not any more. A team at Massachusetts Institute of Technology (MIT) has managed to create the
3D Printing Transparent Glass Read More »
Since 1970, PMC Harvesters have been manufacturing machines for agriculture. The company, operating from Fakenham, England, is part of the Ploeger Oxbo Group and specialises in the manufacture of potato harvesters, pea and broad bean harvesters, soya harvesters and detasslers, which are world-renowned for their efficiency and reliability. As a brand,
Case Study: 3D Printing End-Use Parts for PMC Harvesters Read More »
Markforged have announced the release of their new Industrial Composite Series. The printers, named X3, X5 and X7 allow users to print their products in onyx as they would on a Mark X, but for significantly lower cost. In much a similar way to when the Desktop Composite Range was
BREAKING NEWS: Markforged Release Industrial Composite Series Read More »
One of the challenges that we as 3D printer users face is how to print effectively with a combination of nozzle sizes. How to increase print speed without sacrificing part accuracy and detail. But the fact is, it isn’t possible in a traditional sense; you have to choose between fast
3D Printing with a 0.4mm Nozzle and 0.8mm Nozzle on the Same Part Read More »
Despite boasting state-of-the-art machinery and industrial manufacturing robots that can cost millions of pounds, most automotive assembly plants outsource the manufacturing of custom tools and prototypes to a third party. The reason for this is simple – most assembly plants do not have the necessary tools to manufacture their own parts, and
