TCT Show is a fabulous place to show off new printers and the models that can be made with them. For the 2017 show GoPrint3D were delighted to have the chance to exhibit a full size moving replica head of Johnny 5 – the robot from the film Short Circuit
“Number 5 is Alive” – The Making of Johnny 5 Read More »
The Zortrax M300 bills itself as a large-format desktop 3D printer, and it certainly lives up to its billing on the spec sheet with a roomy 300 x 300 x 300 mm build volume. But how does that build volume translate to the real world? 3D Printing Motorcycle Parts To
Case study: Testing the Zortrax M300 by 3D Printing 1:1 Scale Triumph Daytona Parts Read More »
Although 3D printing has found popularity in a variety of industries due to the cost savings it offers versus traditional manufacturing processes, often it is secondary manufacturers who benefit from it most. A case in point is U.S. Architectural Lighting, a US-based manufacturer of outdoor lights and fittings. The development team
Case Study: Large-Format 3D Printing with U.S. Architectural Lighting Read More »
To test the limits of their Fuse 1 3D printer and show off its capabilities, Formlabs recently 3D printed an enormous pavilion structure for the entrance of their 2017 FUSE conference. The FUSE Pavilion required more than a hundred unique construction modules and parts, over 24-hours of assembly time and
Formlabs Prints at Scale to Create the FUSE Pavilion Read More »
So much went on at TCT this year that we don’t think we could remember it all if we tried. Whether you were there with us or had to miss out, we hope you’ll join us on a little trip down memory lane. If you have any particular memories you
A Look Back At TCT Show 2017 Read More »
Here at GoPrint3D we’re really getting into final preparations for TCT 2017! We hope you are as excited about seeing all the printers, as we are at getting to show them off. We’re taking quite a selection of our 3D printer range down to the NEC this year, and we’re
Gearing up for TCT 2017! The Great Printer Reveal Read More »
On the 1st of November GoPrint3D will be exhibiting at Advanced Engineering 2017 for the first time! Advanced Engineering is held at the NEC, Birmingham, spanning a number of halls. How To Find Us We’re conveniently located at stand D16, which is easy to find: simply go straight over at
Come See Us At Advanced Enginering 2017 Read More »
Markforged recently announced the release of their new Industrial Composite Series, comprising the Markforged X3, X5 and X7 3D printers. These large-format 3D printers offer the strength required to replace costly machining processes, with significant cost savings available as a result. If you missed our launch article, below we have provided
Your Guide to the Markforged X3, X5 and X7 Read More »
A detailed model of the ancient Greek temple, The Parthenon has been created in a collaboration between DL Additive, Arketyp 3D and an amateur enthusiast of ancient architecture. The model, produced in France, used three EnvisionTEC printers to produce the model. The Ultra 3SP is capable of producing high quality
Parthenon Reconstructed with 3D Printing Read More »
Prior to additive manufacturing, Dixon Valve, a US-based manufacturer of fittings for fluid transfer industries, relied on outsourcing and costly in-house machining processes to produce tools. But thanks to the Markforged Mark Two, they are now able to 3D print their own tools and jaws for industrial robotic arms, saving
Case Study: How Dixon Valve US Uses 3D Printing in Robotic Automation Read More »
