- Swappable print cores: For high and low temp materials and composites
- Touchscreen: For easy operation. You can also control the S3 remotely
- Reliable uptime: The S3 is designed to print continuously 24/7
- Compact: Fits on most standard computer desks
- Print quality: Models are true to design with a fine, perfect finish
New for 2019, the Ultimaker S3 can print an enormous range of materials including composites, engineering plastics and nylon.
It is engineered to print continuously, with maximum uptime, reliably. No other Ultimaker 3D printer packs so much capability into such a cost-effective package.
3D printing has long been synonymous with fabricating exceptional parts and models – but repeatability has always been a challenge. Not anymore.
Ultimaker has perfected first layer adhesion with the S3, which scans the build plate and corrects any microscopic discrepancies within the Z-height. The result is a perfect first layer for perfect adhesion and stability on the build plate.
Compact but powerful
The S3’s build area is 230 x 190 x 200 mm which is down on the S5, but you have to remember this is a more compact 3D printer. It has an assembled size of 394 x 489 x 637 mm, which is around the same size as a laser jet. In other words, it’ll fit on a computer desk quite comfortably - filament tubes and all.
The S3 benefits from dual extrusion technology with Ultimaker swappable print cores, which enable you to easily switch between abrasive, non-abrasive and low and high-temp materials. The S3 is compatible with the complete Ultimaker material library, including TPU 95A, CPE+, Tough PLA, PVA and Breakaway.
You can also print with glass and carbon fibre composites. All you need is the Print Core CC Red and you’ll be able to print up to 10kg of carbon fibre.
Overall, the S3 is an outstanding 3D printer. It’s suitable for any application -- industrial, educational and all. Feel free to contact us with any questions.
|Materials||PLA. Tough PLA, ABS, PC, CPE, Nylon, PP, TPU 95A, PVA|
|XYZ Resolution||6.9, 6.9, 2.5 micron|
|Layer Height||20 - 600 microns (0.02-0.6mm)|
|Build Dimensions||230 x 190 x 200 mm|
|Connectivity||WiFi, USB Stick, Ethernet Cable|
|Technology||Fused Filament Fabrication (FFF)|
|System Requirements||MacOS, Windows, Linux|
|Supports||Soluble support structure|
|Dimensions||394 x 489 x 637 mm|
|Print Speed||< 24 mm³/s|
- Ultimaker S3 3D Printer
- Glass build plate x 2
- Spool holder with material guide
- Power cable
- Ethernet cable
- USB stick
- Print core AA 0.4
- Print core BB 0.4
- XY calibration sheet - glass build plate
- Calibration card
- 3 x Nozzle cover
- 1 x 750g reel of Tough PLA
- 1 x 750g reel of PVA
- Glue stick
- Hex screwdriver 2 mm