Formlabs Fuse 1 High Efficiency Package
Our recommended setup for an efficient, optimized workflow between the Fuse 1 3D printer and the Fuse Sift powder recovery station. One additional modular build chamber and two additional powder cartridges enable nonstop printing on a single printer.
- Selective laser sintering (SLS) uses a laser to precisely fuse nylon powder into lightweight, robust parts.
- Produce functional parts in-house, without the delays of service bureaus.
- 165 x 165 x 320 mm build volume for bigger parts and higher throughput.
- No supports. Pack the build chamber with as many parts as you can fit and save time in post‑processing.
A new wave of independent manufacturing and prototyping starts now with the Fuse 1. Bring production-ready nylon 3D printing onto your benchtop with an affordable, compact selective laser sintering (SLS) platform.
The Fuse 1 is Formlabs first benchtop SLS 3D Printer. With a large build volume of 165 x 165 x 300mm it, allows you to print a variety of different sized prototypes to large batches of end-use parts.
The Fuse 1 printer and Sift 1 for sale here is the Formlabs Workflow Essentials Package. You also have to purchase a Service Plan and an industrial vacuum is required. The Additive-X VIP Service Plan version is supported by our UK-based team of highly-experienced Formlabs engineers.
Reliable, consistent printing.
SLS 3D printing fuses nylon powder layer by layer. The unused powder supports the parts during printing so you can create complex, interconnecting designs with no need for support structures.
With patent pending Surface Armor technology, a semi-sintered shell that prints around the surface of the part, the Fuse 1 provides competitive mechanical properties and surface finish without the prohibitive cost or hassle of competitor systems.
Meet the Fuse 1 ecosystem in two minutes:
Sift 1; A Convenient, Intuitive Workflow
Safe, efficient powder recovery.
Meet the side kick to the Fuse 1 the Sift 1 an all-in-one powder recovery station which combines part extraction, powder recovery, storage, and mixing in a single device.
Produce fully-functional parts at a 30% powder refresh rate—with unlimited cycles. This means you can print with up to 70% recycled powder.
Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.
Pack the build chamber with as many parts as you can fit. By doing this you can reduce the time spent in post-processing the parts in the Fuse Sift.
Designed for nonstop throughput.
Add a second removable build chamber, compatible with the Fuse 1 and Fuse Sift, to enable continuous printing and reduce downtime.
Industry leading cooldown times allow you to start a print 1–2 hours after your previous print has finished.
Contact the team at Additive-X to find out more today 01765 694 007 firstname.lastname@example.org
|Layer Height||110 microns|
|Build Dimensions||16.5 x 16.5 x 30 cm|
|Max Part Size||15.9 × 15.9 × 29.5 cm|
|Connectivity||WiFi, USB Stick, Ethernet Cable|
|Technology||Selective Laser Sintering (SLS)|
|Environmental||18 – 28 ºC|
|System Requirements||Windows 7 (64-bit) and up Mac OS X 10.12 and up OpenGL 2.1 4 GB RAM (8 GB recommended)|
|Software||PreForm Desktop Software|
|Supported File Formats||STL or .OBJ FORM file output|
|Dimensions||68.5 x 64.5 x 106.5 cm|
|Weight (KG)||114 kg (without build chamber or powder)|
|Operating Temperature||Up to 200 ºC|
|Power Requirements||EU: 230 VAC, 7.5 A (dedicated circuit)|
|Laser Specifications||Ytterbium Fiber 10W, Laser Spot Size (FWHM) 200 microns|
- Fuse 1 Printer 120V
- 4 x Nylon 12 Powder 6kg
- Fuse Sift 120V
- 2 x Fuse 1 Build Chamber 120V
- 2 x Fuse Powder Cartridge
- Preform Software
- Fuse 1 Printer Stand
- 1 year warranty