Formlabs Form Wash L

All SLA 3D printed parts require washing to remove residual resin. Form Wash L automates this process, leaving you with smooth, clean, high-quality parts every time.

Once washing completes, parts are lifted out of the solvent to air dry, avoiding over-soaked, warped prints. The embedded solvent monitor helps you maintain peak cleaning performance by notifying you when it’s time to replace your solvent.

Use Form Wash L with all of your Formlabs SLA 3D printers. Wash one Form 3L build platform or two Form 3 build platforms with the included build platform adapter.

Maximum Part Size: 33.5 × 20 × 30 cm

Additional Features:

• • Washing Guidlines included on UI
  • Wash Count is tracked for each batch of fresh solvent
  • Gasketed inner and outer lids
  • Wifi for easier firmware updates
  • Sound plays when wash and dry is complete

Compatibility

Compatible with: Form 3L, Form 3BL, Form 3, Form 3B, and Form 2.

Filled Resins and Bucket Replacement

Buckets are rated for 2000 hours of washing unfilled resins

For filled resin, buckets wear out beneath the impellers after 500 hours of washing and must be replaced

Filled resins; Rigid 10k, Rigid 4000, ceramic, Temporary CB, Permanent Crown, Tough 2000

Whats Included:

• Wash basket

• Platform Mount Adapter

• Power Cable

• Wi Fi Antenna

• Non-Reactive Nitrile Gloves

• Rinse Bottle

• Flush Cutters

• Removal Tool 

• Electrical Siphon Pump