Bambu Lab PLA Basic Filament - Silver (Refill)

 Bambu Lab recognizes the importance of PLA and presents the PLA Basic filament specifically engineered for high-speed printing applications.

The Bambu Lab PLA Basic filament refill Silver is designed to excel at high printing speeds, reaching impressive speeds of 250-300 mm/s, while maintaining exceptional toughness. This means you can achieve rapid print times without compromising on the durability of your prints.

With Bambu printers you can order refill filament. To get a spool for this filament you can either reuse your previous spool, print a new one or purchase a Bambu resuable spool.

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

 

 

Colour Code - Silver (10102)

Hex Code - #A6A9AA

Accessory Compatibility