Ultimaker 2+ Connect Anniversary Value Pack Offer - Valid until 31/12/21
Ultimaker 10 Year Anniversary Bundle Offer - Save 20%
• 1 year Professional software
• 1 year extended warranty
• FOC Ultimaker material to the value of £100.00
Celebrate Ultimaker's 10 Year Anniversary with a saving of £676.32
The Ultimaker 2+ Connect is a single extrusion 3D printer designed for fast, efficient single material printing applications. The Connect 2+ features network connectivity, touchscreen controls and swappable nozzles. It can be paired with the optional Ultimaker 2+ Connect Air Manager, designed to increase user safety, it removes up to 95% of ultrafine particles and shields users from hot and moving components to give you more confidence and setup flexibility.
The Utimaker 2+ Connect offers a maximum build volume of 223mm (w) x 220mm (d) x 205mm (h), a layer resolution of 600 to 20 microns (4 available nozzles 0.4mm included) and print speeds up to 24 mm3/s, the Ultimaker 2+ connected is a professional-grade 3D printer for demanding environments, ideal for product design applications or higher education.
As with all Ultimaker printers It uses an open filament system, so you aren’t tied into any filament brand; any quality ABS, PLA or CPE will do; and your experience is enhanced with access to Ultimaker’s global open source community.
Cloud 3D printing built in
Leverage the full power of Ultimaker Cura. Slice with your choice of extensively tested Ultimaker material profiles, or tweak over 400 advanced settings. Then click “print via the cloud” whether you’re at the office or not.
At home or in the office, easily send print jobs to the Ultimaker 2+ Connect. Via Wi-Fi or Ethernet, cloud 3D printing allows remote file transfer with added security from anywhere in the world.
High uptime. Low maintenance
Thousands of designers and educators love Ultimaker technology because it just keeps working – day and night, year after year. Since 2015, over 6 million prints have been prepared for its predecessor. And the Ultimaker 2+ Connect improves on that workhorse legacy..
Achieve your desired result with swappable nozzles. Switch them out in less than 5 minutes for high uptime, choosing between 0.25 mm for detailed prints, 0.8 mm for fast drafts or 3D sketches, or 0.4 mm.
Hit the ground printing
Want a finished print from day one? Unbox and connect three components, and get started via the new touchscreen. This speedy setup even makes installing multiple 3D printers effortless.
Sometimes single extrusion simplicity is all you need. The Ultimaker 2+ Connect builds upon the award-winning benchmark of its predecessor, to add intuitive operation and deeper software connectivity.
|Layer Height||20 - 600 microns (0.02-0.6mm)|
|Build Dimensions||223 x 220 x 205 mm|
|Materials||PLA. Tough PLA, ABS, PC, CPE, Nylon, PP, TPU 95A, PVA|
|System Requirements||MacOS, Windows, Linux|
|Connectivity||WiFi, USB Stick, USB Cable, Ethernet Cable|
|Technology||Fused Filament Fabrication (FFF)|
|Power Requirements||100 – 240 VAC, 50 – 60 Hz|
|Dimensions||342 x 460 x 580 mm|
|Weight (KG)||10.3 kg|
- Ultimaker 2+ Connect 3D Printer
- Power cable and power supply
- 1 x 750g reel of Ultimaker filament PLA Silver Metalic
- USB stick
- Glass Plate
- Spool Holder
- Ethernet Cable
- Calibration Card
- Glue Stick
- Hex Screwdriver 2mm
- Hex Key 2.5mm
- Nozzle Wrench
- Print Head Calibration Aid
- Quick Start Guide
- Safety & Warranty Booklet
- Anniversary Offer
- 1 year Professional software, 3 year extended warranty
- FOC material to the value of £100.00