Form 3 Finish Kit with Film Tool
3D printing models and parts with the Form 3 is a doddle. The Form 3 Finish Kit makes preparing and finishing them a doddle too.
The Finish Kit gives you all the tools you need to get to work on post-processing. After printing, you’ll use the Finish Kit to remove printed parts from the build platform, remove their support material, and rinse parts safely.
The Form 3 Finish Kit includes the following products:
2 rinse buckets: To be partially filled with isopropyl alcohol (IPA).
Rinse station: This holds the two rinse buckets with built-in flip lids.
Rinse basket: Used to transfer parts from one bucket to the next.
Rinse bottle: To be kept full of isopropyl alcohol.
Finishing tray: A safe place to put sticky tools and consumables.
Tank tool: Used to inspect and clean the Form 3 resin tank.
Tweezers: Used to remove supports from parts and unwanted cured material.
Scraper: Used to carefully remove parts from the build platform.
Removal tool: Used to release the base of printed parts from the build platform.
Jig: For securing the build platform in place.
Flush cutters: For carefully removing supports from printed parts.
Disposable nitrile gloves: So you can safely handle parts again and again.
All Form 3 printers come with one Finishing Kit as standard, but it’s also available separately to make your workflow twice as efficient.