Essentium HSE 180-S LT
- Reliable and easy to manage
- Prints at speeds greater than 500 m/s
- Massive 740 x 510 x 650 mm build volume
- Low-temp filaments for various applications
- Designed to be a complete manufacturing tool
The Essentium HSE 180-S LT 3D printer is designed to print at speed low-temperature filaments in the most demanding production environments. Its build size and performance make it perfect for the manufacturing line.
Boasting a massive 740 x 510 x 650 mm build volume and wide-range support for high-performance low-temp thermoplastics, the HSE 180-S LT is capable of small production runs and larger production runs in one sitting. Once a print job has been approved, the HSE 180-S LT fully automates the build process for you.
Print fast at scale
Essentium’s High Speed Extrusion (HSE) print technology enables you to reliably print at speeds greater than 500 m/s while maintaining exceptional print quality. This is thanks to a non-slip, high torque extrusion system and linear servo motors designed to smoothly move across more than one axis (in this case, the X and Y).
At those speeds, the Essentium HSE 180-S LT is class-leading and you can print with a 0.4, 0.8 or 1.2mm nozzle to suit your requirements.
No compromise materials
Despite being a low-temp 3D printer by name, the HSE 180-S LT’s nozzle still reaches a temperature up to 380 C and a bed temperature up to 120 C. This enables you to print a wider range of materials than standard, including PLA XTR, TPU - 74D, TPU - 74D ESD, TPU - 90A FR, PCTG, PCTG ESD and PA – CF.
These materials are engineered to melt and extrude faultlessly to create models and parts of an exceptional quality. They are suitable for a wide range of applications, from prototyping and manufacturing end-use parts for biomedical devices to creating low-temp jigs, fixtures, casings, castings and sockets.
- Biomedical Device
- Commercial Manufacturing
- Footwear and Apparel
- Architecture and Design
- Prosthetic Sockets
- Orthotic Devices
- Low Temp Jigs and Fixtures
- Rapid Prototyping
“There is vast potential in the additive manufacturing market and even more potential for innovative ideas to be realized. We value our collaboration with innovators like Essentium as we aim to meet growing worldwide demand for production-scale 3D manufactured parts by offering users more control, more choice in materials and ultimately lower cost and higher volume.”
–Karel Brans, Senior Market Director, Materialise
|Build Dimensions||740 x 510 x 650 mm|
|Dimensions||2.6 x 1.2 x 1.6 m|
|Print Speed||500 mm/s|
|Power Requirements||4 KVA, 220/240V 20A, Single Phase 50/60 Hz|