Builder Extreme 3000 PRO
- Fully enclosed: The fully enclosed chamber guarantees print quality
- Dual-feed extruder: Prints dual-colours or one colour faster
- Swappable nozzles: Swap nozzles out to influence print quality/ time
- On-board camera: For remotely monitoring prints in real-time
- Touchscreen: Control the whole print process through the built-in screen
- Extremely Large Build Volume 1100 x 1100 x 820 mm
The Extreme 3000 PRO is made to deliver 24/7. With the extremely large build volume of 1100x1100x820 mm XYZ it is the perfect fit for industrial applications. With large format 3D printing you have full design freedom and are able to print large parts in one piece.
The frame has been designed in a way that you have easy access to the build plate from both sides by removing the side panels. 3 different nozzles diameters, 0.4, 0.8 and 1.2 mm, are included to optimise print quality and time for your specific needs. The machine is fully equipped with features such as a heated bed, filament detection, a battery pack and auto bed levelling.
The Extreme 3000 PRO has been designed to print extremely large parts, but you also need to be able to remove the printed parts easily. That is why the machine has removable panels on the left and right side. By removing the panels, you have easy access to remove prints or do any maintenance to the machine if needed.
Extremely large build volume
The Extreme 3000 PRO has an extremely large build volume of 1100x1100x820 mm XYZ. This allows you to print full size prototypes, parts, statues in one piece. The build volume of just under 1 m3 is the perfect size for 3D printing industrial applications.
Easy to use
Despite the large build volume the machine is easy in its use. The large touch display allows you to have full adjustment control over the machine while printing. Large format 3D printing becomes easy and worry free with features such as filament detection and a battery pack when there is a power loss.
Different nozzle diameters
The Extreme 3000 PRO comes with 3 different nozzle diameters which allow you to choose the right print quality and time for your specific needs. A 0.4, 0.8 and 1.2 mm nozzle are included with the purchase. The 0.4 mm nozzle is often used for parts that need to be accurate, the 0.8 mm for printing prototypes within days and 1.2 mm for printing parts within several hours and parts that will be post processed.
|Materials||PLA, PET, PRO1 (ABS replacement), Flexible Filaments|
|Layer Height||0.1 – 0.9 mm|
|Build Dimensions||1100 x 1100 x 820 mm|
|Connectivity||WiFi, USB Stick, Ethernet Cable|
|Technology||Fused Filament Fabrication (FFF)|
|Dimensions||1500x1380x1550 mm (LxWxH)|
|Print Head||Dual extruder with one nozzle (3 nozzle diameters included)|
|Nozzle Diameter||0.4 / 0.8 / 1.2mm|
|Print Speed||Up to 300 mm/s (standard speed 80 mm/s)|
|Travel Speed||up to 500 mm/s|
|Power Requirements||1800 watts (at peak)|
- Nozzle set (0.4, 0.8 and 1.2 mm)
- Spare set of Teflon tubes for extruder
- Pressure plug to clean nozzle
- Glue for heated bed
- Paint roller set for gluing heated bed
- Levelling tools
- Manual AstroBox
- Builder Extreme 3000 PRO 3D Printer